PTZ Unit
0102030405
Intelligent Mid-Load Pan Tilt
Features
● Solid and reliable all-metal shell in line with IP66 standards for all-weather outdoor use
● Low noise will not interfere with audio recording, will not disturb the surrounding
● The use of stepper motor position closed-loop control, to avoid the traditional stepper motor position after the opening of the loop out of the problem of position loss
● Customizable conversion board for quick installation of various loads
● Matching small double housing can be used for medium and short distance dual light monitoring
Pan Tilt Hardware Part
● Max dimensions: H 270mm* L 168mm* W 220mm
● Load bearing form top: Top load
● Transmission form: Precise spur gear drive
● Self-locking load: 10Kg
● Installation method: Upright installation, base fixed at four points （94mm*94mm）
● Supply voltage: 24V
● Camera communication port: Reserved 100Mbps( 1000Mbps is optional)
● Pan slip ring life:3 million revolutions
● Power protection: TVS 6000V lightning-proof, surge proof, in line with GB/T17626.5 Level 4
● Rotation range: Pan 360° continuous rotation, tilt -70°~+45°
● Speed range: Pan 0.01° ~90° /s, tilt 0.01° ~18° /s
● Power consumption:≤5W (Standby), ≤50W (Operation)
● Repeated positioning accuracy:±0.05°
● Angular resolution: ＜ 0.01°
● Body material: Aluminum alloy
● Operating temperature and humidity: -25℃~65℃, ＜ 90% RH
● Protection level: IP66
● Self weight: 6kg
● Load bearing form top: Top load
● Transmission form: Precise spur gear drive
● Self-locking load: 10Kg
● Installation method: Upright installation, base fixed at four points （94mm*94mm）
● Supply voltage: 24V
● Camera communication port: Reserved 100Mbps( 1000Mbps is optional)
● Pan slip ring life:3 million revolutions
● Power protection: TVS 6000V lightning-proof, surge proof, in line with GB/T17626.5 Level 4
● Rotation range: Pan 360° continuous rotation, tilt -70°~+45°
● Speed range: Pan 0.01° ~90° /s, tilt 0.01° ~18° /s
● Power consumption:≤5W (Standby), ≤50W (Operation)
● Repeated positioning accuracy:±0.05°
● Angular resolution: ＜ 0.01°
● Body material: Aluminum alloy
● Operating temperature and humidity: -25℃~65℃, ＜ 90% RH
● Protection level: IP66
● Self weight: 6kg
Pan Tilt Software Part
● Control communication interface: 485/422
● Communication protocol: PELCO-D
● Baud rate: 9600bps
● Self-check: No self-check is required. It will start working within 5 seconds after power-on
● Basic motion function: Manual control 64 level speed adjustable, proportional variable speed (camera support required)
● Number of preset bits: 199 (Standard) +255 (Extendable)
● Positioning function: Absolute angle positioning (adjustable positioning speed) 3D positioning (It needs to be done with the camera)
● Pan Scanning mode: Preset bit point by point scanning (adjustable preset bit dwell time, preset bit scan speed) Pan two-point scanning(adjustable scanning speed and scanning dwell time)
● Watch position: Watch position on or off (can be adjusted back to position time)
● Special functions: Pan-tilt and camera coordinate query or real-time return. With position holding function, abnormal external force caused by the offset can be quickly restored. Vertical jitter suppression is optional
● Communication protocol: PELCO-D
● Baud rate: 9600bps
● Self-check: No self-check is required. It will start working within 5 seconds after power-on
● Basic motion function: Manual control 64 level speed adjustable, proportional variable speed (camera support required)
● Number of preset bits: 199 (Standard) +255 (Extendable)
● Positioning function: Absolute angle positioning (adjustable positioning speed) 3D positioning (It needs to be done with the camera)
● Pan Scanning mode: Preset bit point by point scanning (adjustable preset bit dwell time, preset bit scan speed) Pan two-point scanning(adjustable scanning speed and scanning dwell time)
● Watch position: Watch position on or off (can be adjusted back to position time)
● Special functions: Pan-tilt and camera coordinate query or real-time return. With position holding function, abnormal external force caused by the offset can be quickly restored. Vertical jitter suppression is optional
Load part
● Load type: Overhead single cabin housing (Optional variety of specifications),
overhead double housing (Optional variety of specifications). It can be used with searchlights, laser lights, radar, multispectral detectors and other load types
● Housing auxiliary function: Automatic control wiper (automatically adjust the speed of the wiper according to the rainfall), automatic auxiliary lighting (with automatic near and far light switching function) and fog removal function
● Housing auxiliary function: Automatic control wiper (automatically adjust the speed of the wiper according to the rainfall), automatic auxiliary lighting (with automatic near and far light switching function) and fog removal function
Extended function
● PTZ expansion: Optional edge computing module, gyroscope module, GPS module and 4G communication module